308 AR Tools:
AR-10 DPMS LR-308 SR-25 AR 308 Specific Tools
Much like their smaller AR15 siblings these large bore AR rifles require very specific tools. Additionally theres more information at my other sites on basic gunsmithing tools and AR15 tools.
DPMS .308 Panther Receiver Claw
The “Claw” is the perfect armorer tool for holding all DPMS .308 upper receivers. Made of a solid one piece high strength polymer, the Claw is extremely durable. Simply clamp the Claw into a bench vise, slide the upper onto the Claw, secure with the two holding pins and begin installing your barrel and components.
DPMS .308 Lower Receiver Vise Block – Action Block
The DPMS “308 Vise Block” is similar to an AR15 vise block. The plastic block is inserted and locked into the magwell like a magazine. The block is then firmly clamped in a vise. This is a must have item for working on lower receivers.
DPMS – LR-Series/AR-10/SR-25 .308 BARREL NUT WRENCH
This wrench will work with many AR-10,LR-308 and SR-25 free float handguards.
PRI – AR-10 Barrel Nut Wrench
Heavy-duty wrench provides plenty of leverage for installing and removing barrel nuts when used with a 3/8″ or ½” drive breaker bar, socket wrench, or torque wrench. Cut from 3/8″ thick steel, with plenty of metal so it won’t flex under pressure while transferring the torque evenly to the nut. Models available for AR-15/M16 and ArmaLite® AR-10®.
PRI Barrel Nut Wrench DPMS LR-308 (03-0086 ) – Same as the above except for the DPMS LR-308 barrel nut as well as many others.
ARRINGTON ACCURACY WORKS – AR-15/M16/AR-10/LR-308 Free-Float Handguard Strap Wrench
This is the best for working with free float handguard systems. Easily install or rmove your handguard without damaging the finish of the handguard.
AR 308 Carbon Scraper
The carbon scraper Used for cleaning out the bolt recess.
Barrel Nut Alignment Gauge
Not exactly 308 specific but this simple tool allows you to easily align the barrel nut gas tube hole and reciever gas tube hole while tightening the barrel nut.
AR 308 Gas Tube Wrench
This is a handy tool for holding and positioning a gas tube on the 308 AR or AR-15. One wrench serves both weapons